Jaw type crusher

Overview:Jaw crusher, commonly known as jaw break, also known as tiger mouth. It is a crusher which is composed of two jaw plates, movable jaw and static jaw, and simulates the movement of the two jaws of animals to complete the crushing of materials. It is usually used to break harder materials such as ore, stone and concrete. Jaw crusher is widely used in quarries, mines, construction sites and recycling treatment plants. Their design can be adjusted to the required crushing specifications and production capacity, making them ideal for all sizes and types of engineering projects.

Working structure and principle:The working part of jaw crusher is two jaw plates, one is the fixed jaw plate (fixed jaw), vertical (or the upper end is slightly outward) fixed on the front wall of the body, the other is the movable jaw plate (movable jaw), the position is inclined, and the fixed jaw plate forms a small crushing cavity (working cavity). The movable jaw plate moves back and forth periodically against the fixed jaw plate, sometimes apart, sometimes close. When separated, the material enters the crushing chamber and the finished product is unloaded from the lower part; When approaching, the material installed between the two jaw plates is crushed, bent and split.

Advantages: 1.effectively solve the original limestone crusher due to low output caused by high operation rate, no maintenance time problems. 2. can complete the crushing of large limestone, the maximum crushing particle size of 1000*1200mm, effectively solve the original "one side is the shortage of limestone supply, while storing a large number of large limestone can not be used". 3. The mixing uniformity of the two materials is good, and the amount of desulfurized limestone is greatly improved. The dosage can reach 60%, effectively reducing the cost of raw materials. 4.Power consumption has decreased. 5.waste particle size is small, only 2—15mm to effectively solve the original limestone particle size is large, often blocking or even affect the output of the mill problem.

Summary: Jaw crusher are designed to handle a wide range of materials, from soft to very hard, and are able to produce various sizes of output depending on the crusher setup. They are commonly used to crush large rocks, ores, concrete and other materials into smaller pieces for further processing or recycling. Jaw crusher is known for its reliability, high efficiency, and relatively simple operation and maintenance compared to other types of crusher. They are usually the main crusher in the crushing circuit and are essential to reduce the size of the material to be processed or transported later.

Disclaimer of Liability

Some articles, images and videos reproduced on this website (www.Ivssn.com) come from the Internet, and their copyright and accountability belong to the original author. This website is reproduced for the purpose of delivering more information to everyone, and does not represent the views of this website. If you have any objection to the content forwarded by this network or related to copyright issues, please contact us as soon as possible, we will take appropriate measures to deal with it promptly.