Roller press

Overview: Roller press, also known as extrusion mill, roller mill, roller machine, is a new type of cement energy-saving grinding equipment developed in the mid-1980s, is a commonly used industrial equipment for roller processing of materials. Its working principle can be simply described as: through a pair or more interacting rollers, apply a certain pressure and torque, the material is bent, deformed, pressing and other processing. The main working principle of the roller press is as follows:
1. Roller wheel transfer force: The main components of the roller press are one or more pairs of roller wheels, which interact through the transmission system (such as motor, gear, etc.) to apply force on the workbench surface. In general, the distance between rollers can be adjusted to accommodate different sizes and shapes of materials.
2. Press the material: The material is placed on the table surface between the roller wheel, and the roller wheel applies pressure to roll the material through rotation and movement. The surface of the roller wheel is usually decorated with special patterns or coatings to increase friction and improve the rolling effect.
3. Control system: The roller press is usually equipped with a set of control system, which is used to adjust the rotation speed and pressure of the roller wheel. The operator can adjust according to the processing requirements to ensure that the processing effect meets the requirements.
4. Material bending and deformation: The rotation and movement of the roller wheel make the material bend and deformation between the roller wheel. The shape and bending degree of the material can be controlled by adjusting the spacing and working parameters of the rollers.
Summary: In general, the roller press through the rotation and movement of the roller wheel, apply a certain force and pressure, the material is rolled processing. It is widely used in metal processing, plastic processing, rubber processing and other industries, can achieve bending, pressing, stretching and other processing effects on materials. It can replace the pre-grinding system of ball mill with high energy consumption and low efficiency, and reduce the function of steel consumption and working noise. It is suitable for the construction of new plants, and can also be used for the technical transformation of old plants, so that the system output can be increased by 30-50%.

Disclaimer

Some of the articles, graphics, and videos reproduced on this website (www.Ivssn.com) are sourced from the internet. The copyright and responsibility belong to the original authors. The reposting on this website is aimed at disseminating more information to everyone and does not represent the views of this website. If you have any objections to the content reposted on this website or if there are any copyright issues involved, please contact us as soon as possible, and we will promptly take appropriate measures to address them.